Wireless 24 Key RGB LED Remote Control with 16 color options, dimmable brightness, and dynamic modes including Flash, Strobe, Fade, and Smooth. Ideal replacement remote for RGB LED lights and LED furniture.
Shop
Showing 145–192 of 1337 results
-
Resistors
22K Ohm Resistor 1/4 Watt (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Digital Meter, Multi Meters
22mm LED Digital Display Gauge Volt Voltage Meter Indicator
Specifications of 22mm LED Panel Light Voltage Indicator
- COLOR: RED / GREEN / BLUE / YELLOW / WHITE
- Voltage Range: 60V-500VAC
- Mounting: 22MM
- Life of continuous working: Typically over 20,000 hours.
- Environmental Temperature: -25+55 Degrees Centigrade
- Relative Air Humidity: ?90%
- Frequency: AC 50-60 Hz
SKU: n/a -
-
ICs
24C16
- Low Voltage and Standard-Voltage Operation
- 2-wire Serial Interface
- Schmitt Trigger, Filtered Inputs for Noise Suppression
- Bi-directional Data Transfer Protocol
- 100kHz and 400kHz Compatibility
- Write Protect Pin for Hardware Data Protection
- 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes
- Partial Page Writes are Allowed
- Self-timed Write Cycle (10mS max)
SKU: n/a -
Diodes
24V 1/2W Zener Diode Zener diode 24 V 0.5W
24V 1/2W Zener Diode product and all other general purpose diode types such as Schottky (Baritt), Zener, Crystal, Photo Diode, LED (Light Emitting Diode), Metal Case Power Diodes, Transit; You can purchase various sheath types of Silicon or Germanium models
SKU: n/a -
Adapters/Power Supply Modules
24v 2A Adapter Power Adapter 24V 2000mA
- 100% Brand New
- Input Voltage: 100~240V AC 50-60HZ
- Output Voltage: DC 24V(constant voltage)
- Output Current: Max 2A
- Output Wattage: Max 48W
- DC plug connector size: 5.5mmx2.5mm; compatible Polarity internal: internal +, outside –
- Safety Compliance: FCC/CE/RoHS/CCC
- Working temperature: -20~60
- AC input power cable length: 47.2in / 120cm
- DC output power cable length: 36.2in / 92cm
- Adapter body size: 4.9in(L) x 2.0in(W) x 1.2in (H)
SKU: n/a -
-
Resistors
27 Ohm 1/4Watt Resistor (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Resistors
270 Ohm 1/4Watt Resistor (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Resistors
270K Ohm Resistor 1/4 Watt (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Resistors
27K Ohm Resistor 1/4 Watt (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
IC Base, ICs
28 Pin – DIP IC Socket/Base
IC sockets are generally for preventing damage to IC’s from soldering and while testing multiple circuits. These are made from Black Thermoplastic and tin-plated alloy contacts. One end is notched to aid in identification. They can be mounted end to end to suit longer IC’s.
SKU: n/a -
Module, Relay Modules, Relay Modules, Relays & Interface Module
2Channel Relay Module
- 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equiped Equipped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low)
- Opto-isolated inputs
- Indication LED’s for Relay output status
SKU: n/a -
Accessories
2mm Vibrator
- Motor construction: 10- Flat coreless vibration motor
- Coil construction: Flat coreless core
- Rectifying method: Precious brush and commutator
- Rated Load: Vibration weight
- Rotation direction: CCW or CW
- Motor position: Any position available
- Voltage range for use: DC 2.5V – 3.5V
- Allowable temperature range: -20C to 70C
- Storage environment: -30C- 80C
SKU: n/a -
Transistors & Mosfet
2N2219 – NPN Transistor
- Small Signal NPN Transistor
- Current Gain (hFE), typically 50 for small signal
- Continuous Collector current (IC) is 800mA
- Collector-Emitter voltage (VCEO) is 50 V
- Collector-Base voltage (VCB0) is 75V
- Emitter Base Voltage (VBE0) is 6V
- Turn on time is 40ns
- Turn off time is 250ns
- Available in To-92 Package
SKU: n/a -
Transistors & Mosfet
2N2907 Bipolar PNP Transistor
Features and Technical Specification
- Having a high value of current (max. 600 mA)
- Low voltage value (max. 40 V)
- It comes in different types of packages TO-92, TO-18
- These are Lead (Pb) free devices
- Collector to Emitter voltage (VCEO) is 40v (max.)
- Collector to Base voltage (VCBO) is 60v (max.)
- Emitter to Base voltage(VEBO) is 5v (normally)
- The maximum value of Collector current is 600mA
- Power dissipation at ambient temperature is about 400mW
- Having DC current gain (hfe) of 100 to 300 (max.)
- The temperature of operation and storage is -65 to +150 C
SKU: n/a -
-
Transistors & Mosfet
2N3906 PNP Transistor
- Bi-Polar PNP Transistor
- DC Current Gain (hFE) is 300 maximum
- Continuous Collector current (IC) is 200mA
- Emitter Base Voltage (VBE) is 5V
- Base Current(IB) is 5mA maximum
- Collector Emitter Voltage (VCE) is 40V
- Collector Base Voltage (VCB) is 40V
- Available in To-92 Package
SKU: n/a -
Transistors & Mosfet
2N5401 PNP Transistor
2N5401 Features and Electrical Characteristics
- Available in Pb Free package
- High collector breakdown voltage
- With DC Current Gain (hFE) up to 100
- Maximum voltage across collector and emitter: 150V
- Maximum current allowed trough collector: 600mA
- Maximum voltage across collector and base: 160 V
- Maximum voltage across base and emitter: 5V
- Operating temperature range: -55C to +150C
- Maximum power dissipation: 0.62 W
SKU: n/a -
Transistors & Mosfet
2SA1013 Bipolar Transistor
- Type Designator: 2SA1013
- Material of transistor: Si
- Polarity: PNP
- Maximum collector power dissipation (Pc), W: 0.9
- Maximum collector-base voltage Ucb, V: 160
- Maximum collector-emitter voltage Uce, V: 160
- Maximum emitter-base voltage Ueb, V: 6
- Maximum collector current Ic max, A: 2
- Maksimalna temperatura (Tj), °C: 125
- Transition frequency (ft), MHz: 15
- Collector capacitance (Cc), pF: 35
- Forward current transfer ratio (hFE), min: 60
- Noise Figure, dB: –
SKU: n/a -
Transistors & Mosfet
2SA1941 Bipolar Transistor
2SA1941 bipolar transistor p-n-p type transistor. Collector-Emitter Voltage: -140 V Collector-Base Voltage: -140 V Emitter-Base Voltage: -5 V Collector Current: -10 A Collector Dissipation – 100 W DC Current Gain (hfe) – 55 to 160 Transition Frequency – 30 MHz Operating and Storage Junction Temperature Range -55 to +150 ?C
SKU: n/a -
Transistors & Mosfet
2SC2331 Bipolar Transistor
- Type Designator: 2SC2331
- Material of transistor: Si
- Polarity: NPN
- Maximum collector power dissipation (Pc), W: 1
- Maximum collector-base voltage |Ucb|, V: 80
- Maximum collector-emitter voltage |Uce|, V: 60
- Maximum emitter-base voltage |Ueb|, V: 8
- Maximum collector current |Ic max|, A: 0.7
- Transition frequency (ft), MHz: 30
- Collector capacitance (Cc), pF: 8
- Forward current transfer ratio (hFE), min: 40
- Noise Figure, dB: –
- Package of 2SC2331 transistor: TO92
SKU: n/a -
-
Transistors & Mosfet
2SC5198 Bipolar Transistor
- Type: NPN
- Collector-Emitter Voltage, max: 140 V
- Collector-Base Voltage, max: 140 V
- Emitter-Base Voltage, max: 5 V
- Collector Current − Continuous, max: 10 A
- Collector Dissipation: 100 W
- DC Current Gain (hfe): 55 to 160
- Transition Frequency, min: 30 MHz
- Operating and Storage Junction Temperature Range: -55 to +150 °C
- Package: TO-3P
SKU: n/a -
Transistors & Mosfet
2SC828 Bipolar Transistor
- Type – NPN
- Collector-Emitter Voltage: 25 V
- Collector-Base Voltage: 30 V
- Emitter-Base Voltage: 7 V
- Collector Current: 0.05 A
- Collector Dissipation – 0.4 W
- DC Current Gain (hfe) – 130 to 520
- Transition Frequency – 220 MHz
- Noise Figure – 6 dB
- Operating and Storage Junction Temperature Range -55 to +150 °C
- Package – TO-92
SKU: n/a -
Transistors & Mosfet
2SD313 Bipolar Transistor
- Type –NPN
- Collector-Emitter Voltage: 60V
- Collector-Base Voltage: 60V
- Emitter-Base Voltage: 5V
- Collector Current: 3A
- Collector Dissipation – 30W
- DC Current Gain (hfe) –40 to 320
- Transition Frequency – 5 MHz
- Operating and Storage Junction Temperature Range -55 to +150C
SKU: n/a -
Platform Cars, Robotics
2WD Robo Chassis
- Mechanical structure, easy to install.
- This car has tachometer encoder
- With 4 cell AA battery holder and power switch.
- Can be used for distance measurement, velocity.
- Can use with other devices to realize the function of tracing, obstacle avoidance, distance testing, speed testing, wireless remote control.
- Gear Motor reduction radio: 1:48.
- Size: 22cm x 14.7cm, wheel size: 7cm x 7cm x 2.6cm.
- Note: motor power supply is 3V~6V.
SKU: ROB007 -
Sensors, Soil
3 In 1 Soil NPK Sensor Probe For Agricultural Nitrogen Phosphorus Potassium Kit
- Power supply: 5-30VDC
- Maximum power consumption: ≤0.15W
- Operating temperature: -40~80℃
- NPK parameters:
- Range: 0-1999 mg/kg(mg/L)
- Resolution: 1 mg/kg(mg/L)
- Precision: ±2%FS
- Response time: ≤1S
- Protection grade: IP68
- Probe material: 316 stainless steels
- Sealing material: Black flame-retardant epoxy resin
- Default cable length: 2 meters, cable length can be customized.
- Dimensions: 45*15*123mm
- Output signal: RS485/4-20ma/0-5v/0-10v
SKU: n/a -
Wires & Connectors
3 Pin C3 Connector
Buy best Quality Electrical and electronics components from Electronation Pakistan in whole sale price. All kind of electrical and electronics components are available.
This is a simple three wire cable. Great for jumping from board to board or just about anything else.
3 pins. 0.1″ spacing. Nylon connectors and mating pc mount, snap-lock header. Female socket connector is pre-wired with 11″ long color-coded 22 AWG stranded wire.
SKU: n/a -
Wires & Connectors
3 Pin Terminal Block Male/Female
- Product Name : PCB Terminal Block;
- Material: Metal and Plastic.
- Pin header: Brass Tin plated
- Mounting Style: Through Hole
- Color: Green
- Pitch: 5.08mm.
- Position: 3 Pin.
- Rated Value: 300V 15A.
- Wire range: 28-12AWG
- Temperature range: -40 degrees Celsius~105 degrees Celsius
- Soldering temperature: 250℃ ±10℃ /5Sec
- Wire strip length: 4.5~5mm
- Withstanding Voltage: 1.5KV
- Approx. Weight: 5gm
SKU: n/a -
Resistors
3.3 Ohm 1/4Watt Resistor (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a
3 piece Wire Brush Set 








































