Shop
Showing 337–384 of 1337 results
-
ICs
74HC4514 – 4-to-16 line Decoder/Demultiplexer
- Input levels: CMOS level
- 16-line demultiplexing capability
- Decodes 4 binary-coded inputs into 16 mutually-exclusive outputs
- Complies with JEDEC standard no. 7 A
- ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200V
- Multiple package options
- Specified from -40C to +85C and -40C to +125C
SKU: n/a -
ICs
74HC595 74HC595D Shift Register
74HC595 8-BIT SERIAL-IN SERIAL OR PARALLEL-OUT SHIFT REGISTER contain an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has parallel 3-state outputs. Separate clocks are provided for both the shift and storage register. The shift register has a direct overriding clear (SRCLR) input, serial (SER) input, and serial outputs for cascading. When the output-enable (OE) input is high, the outputs are in the high-impedance state.
SKU: n/a -
ICs
74LS32 (or 7432) IC-OR Gate-Quad-2 Input 74-LS32
- Dual Input IC with 4 OR Gates with an operating voltage range from 3V to 18V
- Fully Static and Medium Speed Operation: with tPHL, tPLH = 60ns (typ) at 10V
- DC input current: 10mA
- High-Voltage Type (20V Rating)
- Power Dissipation: 500mW
- Maximum propagation delay is 250ns.
- Standard symmetric output
- Minimum logic Low and High voltage @+5V is1.5V and 3.5V
- Maximum Transition Time is 200ns
SKU: n/a -
DC Motor, Motors & Drivers
755 DC Motor Dual Shaft
- Model: RS-775 DATASHEET
- Voltage: 12v-24v universal
- Selectable voltage / speed (no load /per minute)
- 12V: 3000 4500 6500 10000
- 24V: 6000 9000 13000 20000
- Shaft length: 50mm
- Shaft diameter: 5mm
- Voltage: 12-24V DC
- Speed: 3000-20000 rpm
- No-load current: 1.7A (starting current 5A)
- Rated current : 2A
- Weight: 0.35KG
- Dimensions: outer diameter 44mm, length 66.5mm
SKU: n/a -
Heaters, Incubator
75W Ceramic Heater Heat Emitter Lamp Incubator
This 75w Ceramic Heater Poultry Warmer emitter bulb is the perfect 24-hour heat source for all reptiles. These porcelain heating devices screw into a standard porcelain incandescent socket, giving off intense muscle-penetrating infrared heat while emitting no light. The flat-faced design is more efficient and longer-lasting than conical designs which build up excess heat internally ultimately carbonizing the element.
SKU: n/a -
-
Voltage Regulators
7809 Voltage Regulator
- 9V Positive Voltage Regulator
- Minimum Input Voltage is 11V
- Maximum Input Voltage is 35V
- Output Current: 1.5 A
- PSRR / Ripple Rejection: 55 dB
- Output Type: Fixed
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum of 125 degree Celsius
- Available in TO-220, TO-3 and KTE package
SKU: n/a -
Voltage Regulators
7812 Voltage Regulator
7812 is a 12V Voltage Regulator that restricts the voltage output to 12V and draws 12V regulated power supply. The 7812 is the most common, as its regulated 12-volt supply provides a convenient power source for most TTL components. Output Voltage:12V. Output Current:1A. Input Voltage: 14.6 – 35VDC.
SKU: n/a -
Voltage Regulators
7815 Voltage Regulator
- 15V Positive Voltage Regulator
- Minimum Input Voltage is 17V
- Maximum Input Voltage is 35V
- Output Current: 1.5 A
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum of 125 degree Celsius
- Available in TO-220, TO-3 and KTE package
SKU: n/a -
Voltage Regulators
7818 Voltage Regulator
- Output voltage tolerances of ±2% at Tj = 25˚C and ±4% over the temperature range (LM340A)
- Line regulation of 0.01% of VOUT/V of ∆VIN at 1A load (LM340A)
- Load regulation of 0.3% of VOUT/A (LM340A)
- Internal thermal overload protection
- Internal short-circuit current limit
- Output transistor safe area protection
- P+ Product Enhancement tested
SKU: n/a -
Voltage Regulators
7824 Voltage Regulator
- 24V Positive Voltage Regulator
- Minimum Input Voltage is 33V
- Maximum Input Voltage is 40V
- Output Current: 1.5 A
- Internal Thermal Overload and Short circuit current limiting protections are available.
- Junction Temperature maximum of 125 degree Celsius
- Available in TO-220, TO-3 and KTE package
SKU: n/a -
Voltage Regulators
7905 Voltage Regulator
- 5V Negative Voltage Regulator
- Output Voltage: -5V
- Output Current: 1.5A
- Minimum Input Voltage is 7V
- Maximum Input Voltage is 25V
- Operating current(IQ) is 5mA
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Junction Temperature maximum 125 degree Celsius
- Available in TO-220 and KTE package
SKU: n/a -
Voltage Regulators
7912 Voltage Regulator
- 12V Negative Voltage Regulator
- Minimum Input Voltage is -14.5V
- Maximum Input Voltage is -27V
- Peak Output Current is 2.2A
- Average Output Current is upto 1A
- Internal Thermal Overload and Short circuit current limiting protection is available.
- Available in TO-220 package only.
SKU: n/a -
7 Segments & Dot Matrix, Display
8 inch 7 segment display 8 inch seven segment led display
- 8 inch 7 segment Display side pin
- Common anode 7 segment display
- Common cathode 7 segment display
- I.C. compatible
- Low Power Consumption
- High Brightness
- RoHS compliant
- Excellent Color and product Uniformity
- Excellent aesthetic look and Character Appearance
- Easy Mounting on PCB or Sockets
- Low Current Operation
- Excellent digit appearance
- Wide viewing angle
SKU: n/a -
Crystals and Oscillators
8 MHz Crystal Oscillator
A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a vibrating crystal of piezoelectric material to create an electrical signal with a precise frequency. This frequency is often used to keep track of time, as in quartz wristwatches, to provide a stable clock signal for digital integrated circuits, and to stabilize frequencies for radio transmitters and receivers. The most common type of piezoelectric resonator used is the quartz crystal, so oscillator circuits incorporating them became known as crystal oscillators, but other piezoelectric materials including polycrystalline ceramics are used in similar circuits.
SKU: n/a -
IC Base, ICs
8 Pin – DIP IC Socket/Base
IC sockets are generally for preventing damage to IC’s from soldering and while testing multiple circuits. These are made from Black Thermoplastic and tin-plated alloy contacts. One end is notched to aid in identification. They can be mounted end to end to suit longer IC’s.
SKU: n/a -
Resistors
8 Pin SIP Resistor 10K
SIP Resistor Arrays (Single Inline Package) is an efficient way to pack several of the same value resistors into a convenient 0.1 spaced package. Available in different resistance values and number of pins. Pin 1 is identified with a dot above the pin also known as Resistor Networks.
SKU: n/a -
Solar Panels
8 Watt 12 V Polycrystalline Solar Panel
12v charging aluminium framed monocrystalline waterproof solar panel with an output of 8 Watts, ideal for use with caravans, boats, cars etc, supplied diode protected with approx 5 metres of barely ended cabling, these weigh approx 1.1kg and their dimensions are 300mm x 300mm x18mm, suitable for all 12v charging requirements.
SKU: n/a -
Resistors
8.2 Ohm 1/4Watt Resistor (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Resistors
8.2K Ohm Resistor 1/4 Watt (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Accessories
8″ Tie Cable Tie Clip 8 inch – WHITE
- Length: 8 inches
- Purpose: Multipurpose (basically tie two things together)
- Light, Safe &Unbreakable.
- Slip Proof Lock.
- Simply to insert Due to Bent Tail.
- Inside Serration For a Strong Hold onto Bundles.
- Easy Application Either Manually or With a Processing Tool.
- These Cable Ties Are Used For Routing, Bundling & Securing of Cables, Pipes, and Hoses As Well As For Car Wheel Cup.
SKU: n/a -
Accessories
8″ Tie Clip – Single Piece
- Light, Safe & Unbreakable.
- Slip Proof Lock.
- Simply to insert Due to Bent Tail.
- Inside Serration For a Strong Hold onto Bundles.
- Easy Application Either Manually or With a Processing Tool.
- These Cable Ties Are Used For Routing, Bundling & Securing of Cables, Pipes and Hoses As Well As For Car Wheel Cup.
SKU: n/a -
Incubator, Rolling Trays
80 Egg Rolling Tray (220VAC)
- Egg Capacity: 70-80 eggs (may vary depending on egg size and arrangement)
- Temperature Control:
- Temperature Range: 20°C to 40°C (68°F to 104°F)
- Temperature Accuracy: ±0.1°C
- Humidity Control:
- Humidity Range: 40% to 70%
- Humidity Accuracy: ±5%
- Turning Interval:
- Adjustable Turning Interval: 0.1 to 99.9 hours
- Rolling Tray Rotation: Gently rotates eggs for optimal incubation conditions
SKU: n/a -
Propeller
8045 Propeller
Propellers 8045(8X4.5) ABS Props have high quality propellers especially designed for multi copters. Black Propellers 8045(8X4.5) ABS Props has 15 degree angle design in the end of the propeller to avoid whirlpool multi copter flying. The Propellers 8045(8X4.5) ABS Props are light in weight and have high strength propellers. These are used in the drones as well as multi copters . The props have light weight, to help improve the air-powered efficiency and aero foil stability.
SKU: n/a -
ICs
8051 Atmel AT89C51 Microcontroller 8-bit
- Compatible with MCS-51 Products
- 4K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 24 MHz
- Three-Level Program Memory Lock
- 128 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Two 16-Bit Timer/Counters
- Six Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
SKU: n/a -
ICs
8051 Microcontroller
8051 is an 8-bit family of microcontrollers developed by Intel. This microcontroller was also referred as a system on a chip because it has 128 bytes of RAM, 4K bytes of ROM, 2 Timers, 1 Serial port, and four ports on a single chip. The CPU can work for only 8 bits of data at a time because 8051 is an 8-bit processor. In case the data is larger than 8 bits then it has to be broken into parts so that the CPU can process conveniently.
SKU: n/a -
Resistors
82 Ohm 1/4Watt Resistor (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Resistors
820 Ohm Resistor 1/4 Watt (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistor’s resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and can’t generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Resistors
820K Ohm Resistor 1/4 Watt (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Resistors
82K Ohm Resistor 1/4 Watt (5% tolerance)
Resistors are electronic components which have a specific, never-changing electrical resistance. The resistors resistance limits the flow of electrons through a circuit. They are passive components, meaning they only consume power (and cant generate it). Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.
SKU: n/a -
Transistors & Mosfet
8N60 N-Channel Power Mosfet Transistor
- 8N60 N-Channel Power Mosfet Transistor
- Ultra low gate charge ( typical 28 nC )
- Low reverse transfer capacitance ( Crss= typical 12.0 pF )
- Fast switching capability
- Avalanche energy specified
- Improved dv/dt capability, high ruggedness
- Drain Current: ID= 7.5A at TC= 25
- Drain Source Voltage: VDSS= 600V
- Static Drain-Source On-Resistance: RDS(on)< 1.2
SKU: n/a -
-
Adapters/Power Supply Modules
9V 1.5A Adapter Power Adapter 9V 1500mA
- Input: 100 – 240 V AC;
- Output: DC 9V, 1500mA;
- Safety features: high efficiency and reliability;
- Low interference and noise;
- Our products are CE / FCC / RoHS, tested by the manufacturer to meet and / or exceed OEM specifications
- Compatible with led Lamps
SKU: n/a -
Transistors & Mosfet
A1015 PNP Transistor
The main use is for audio frequency amplifier applications. It can also be used for the switching purpose just like other PNP transistors. When use as an Audio frequency general purpose amplifier, can be operated in the active region. This transistor is further divided into four groups according to the DC current gain, O, Y, G, and L and has 140, 240, 400 and 700 hfe DC current gain respectively.
SKU: n/a -
BLDC Motor, Motors & Drivers
A2212 – 1400KV BLDC Brushless Motor
- KV: 1400
- No-load Current : 10 V : 0.5 A.
- Current Capacity: 12A/60s
- No Load Current @ 10V: 0.5A
- No. Of Cells: 2-3 Li-Poly
- Motor Dimensions: 27.5 x 30mm
- Shaft Diameter: 934;3.17mm
- Shaft diameter: 3.175mm.
- Minimum ESC Specification: 18A (30A Suggested)
- Thrust @ 3S with 1045 propeller: 1000gms approx.
- Thrust @ 3S with 0945 propeller: 650gms approx.
- Thrust @ 3S with 0845 propeller: 550gms approx
SKU: n/a
755 DC Motor Dual Shaft 








































