-
×
Infrared receiver KY-022
1 × ₨ 169 -
×
HC-SR501 PIR Human Motion Sensor
1 × ₨ 229
Subtotal: ₨ 398
Distance & Proximity
Showing all 21 results
-
Distance & Proximity, Light, Sensors
APDS9960 proximity and light intensity sensor I2C 3.3V
- Gesture recognition using reflected IR
- Digital proximity sensing using reflected IR
- Separate Red/Green/Blue light intensity sensors
- Ambient (clear) light intensity sensor
- IR light-blocking filter
- Interrupt output available
- I2C interface with good library support
- 3.3V operation
SKU: n/a -
Distance & Proximity, Sensors
HC-SR501 PIR Human Motion Sensor
- Wide range on input voltage varying from 4.V to 12V (+5V recommended)
- Output voltage is High/Low (3.3V TTL)
- Can distinguish between object movement and human movement
- Has to operating modes – Repeatable(H) and Non- Repeatable(H)
- Cover distance of about 120° and 7 meters
- Low power consumption of 65mA
- Operating temperature from -20° to +80° Celsius
SKU: n/a -
-
Distance & Proximity, Sensors
HCSR501 HC-SR501 PIR Sensor
- Use BISS0001 signal processing IC, sanyo genius regulator
- Voltage: 5V 20V
- Power Consumption: 65mA
- TTL output: 3.3V, 0V
- Delay time: adjustable (0.3 sec 10 minutes)
- Lock time: 0.2 sec
- Trigger methods: L disable repeat trigger, H enable repeat trigger
- Sensing range: less than 120 degree, within 7 meters
- Temperature: 15 ~ +70
- Dimension: 32*24 mm, distance between screw 28mm, M2, Lens dimension in diameter: 23mm
SKU: n/a -
Distance & Proximity, IR & Vision, Sensors
Infrared Proximity Range – GP2Y0A41SK0F Sharp Short Range
Infrared Proximity Range – GP2Y0A41SK0F Sharp Short Range Sharp infrared distance sensor makes continuous distance readings and outputs an analog voltage proportional to an objects range. Working range of 1.5 to 12 (4 cm to 30 cm). Kit includes wires and connector. This model is a direct replacement for the discontinued Sharp GP2D120.
SKU: n/a -
Distance & Proximity, IR & Vision, Sensors
Infrared Proximity Sensor – GP2Y0A02YK0F Sharp Long Range
Infrared proximity sensor made by Sharp. Part # GP2Y0A02YK0F has an analog output that varies from 2.8V at 15cm to 0.4V at 150cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.
This sensor is great for sensing objects up to 5 feet away!
SKU: n/a -
Distance & Proximity, IR & Vision, Sensors
Infrared Proximity Sensor – GP2Y0A21Y Sharp Mid Range
Infrared proximity sensor made by Sharp. Part # GP2Y0A21YK has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend purchasing the related pigtail below or soldering wires directly to the back of the module.
SKU: n/a -
Distance & Proximity, IR & Vision, Sensors
IR Proximity Sensor 0A4-1SK
- Type of sensor: photoelectric
- Range : 40~300mm(1.5 to 12)
- Output configuration: Analogue voltage
- Operation mode: Diffuse-reflective
- Supply voltage: -0.3~7V DC
- Connection: S3B-PH
- Max operating current: 22mA
- Average current consumption: 12 mA
- Output voltage differential over distance range: 2.3 V (typical)
- Update period: 16.5 4 ms
- Size: 44.5 mm x 18.9 mm x 13.5 mm (1.75 x 0.75 x 0.53)
- Operating temperature: -10~60C
- Body material: Plastic
SKU: n/a -
Distance & Proximity, Sensors
LM12-3004PA M12 detection distance 2mm 4mm Inductive Proximity Switch Sensor
Distance & Proximity, SensorsLM12-3004PA M12 detection distance 2mm 4mm Inductive Proximity Switch Sensor
Proximity switches are the most common solution for non-contact detection. The inductive type is the widely used proximity switch, which uses electromagnetic waves to detect the metal object near the sensor detection surface. In application, this is a very simple technology to detect 1”~2” metal objects.
SKU: n/a -
Distance & Proximity, Mega Payday Sale, Sensors
Outdoor 12V Infrared PIR Motion Sensor Switch
-
Detection range : 180
-
Operating voltage : 12V
-
Detection distance : 15m (24) (adjustable)
-
Delay Time : 15 seconds to 7 minutes (adjustable)
-
Installation height :1.8m 2.5m
-
Material : ABS
-
Dimensions : 60 x 47 x 156mm
-
Installation : open type, (hole 16mm) installation, adjusting for the next button
SKU: n/a -
-
Distance & Proximity, Sensors
PIR Sensor Detector Smart Switch 220V
- Working Voltage: AC 85-265V
- Sensing angle: 180 degree
- Sensing distance: Max 12m (25℃) (Adjustable)
- Sensor delay: 5s – 6min (Adjustable)
- LUX Setting: 2 – 2000LUX (Adjustable)
- Material: ABS
- IP rating: IP65
- Installation Height: 1.8m – 2.5m
- Lifespan: 50,000 hours
- Working temperature: –10℃ ~ +40℃
- Working humidity: less than 93% RH
- Item size: 15.6 * 6.0 * 4.7cm / 6.1 * 2.4 * 1.9in (L * W * H)
- Item weight: 118g / 4.2oz
- Package size: 20 * 14 * 4.7cm / 7.9 * 5.5 * 1.9in (L * W * H)
- Package weight: 128g / 4.5oz
SKU: n/a -
Distance & Proximity, Sensors
PR08-2DP Inductive Proximity Sensor
- Wire type and power
- DC 3-wire type 12-24VDC Sensing side diameter
- M08Sensing distance 2mm
- Installation Non-shield(non-flush)
- Standard sensing target8x8x1mm(iron)
- Response frequency1kHzCurrent specification
- Current consumption: Max. 10mA
- Control output PNP Normally Open Material Brass(nickel plated)
- Cable Standard/material Standard cable
- Protection structureIP67
- Approval Body length Standard type
- Environment Ambient temperature-25 to 70C, storage: -30 to 80C
- Environment Ambient humidity35 to 95% RH, storage: 35 to 95% RH
- Hysteresis(distance)Max. 10% of sensing distance
- Residual voltage Max. 2V
- Weight Approx. 64g(approx. 52g)
SKU: n/a -
Distance & Proximity, Sensors
PR12 2DN Autonics Proximity Sensor
- Improved the noise resistance with a dedicated IC.
- Built-in reverse polarity protection circuit (DC 3-wire type).
- The built-in surge protection circuit.
- Built-in overcurrent protection circuit (DC type).
- Long life cycle and high reliability, and simple operation.
- IP67 protection structure (IEC standard).
- Replaceable for micro switches and limit switches.
SKU: n/a -
Distance & Proximity, Sensors
PR12 4DN Autonics Proximity Sensor
PR12 4DN Autonics PR12-4DN Inductive Proximity Sensor – 4mm is the most common and affordable solution for no-touch object detection. The most commonly-used proximity sensor is the inductive type, which generates an electromagnetic field to sense metal objects passing close to its face. This is usually the easiest sensing technology to apply in applications where the metal object to be detected is within an inch or two of the sensor face. Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness, and type of metal being detected and will in general be between 70 to 80% of the standard distance.
SKU: n/a -
Distance & Proximity, Sensors
PR12 4DP Proximity sensor Autonics
Sensing distance 1.5mm Installation Shield(flush) Standard sensing target 8×8×1mm(iron) Response frequency 1.5kHz Current specification Current consumption: Max. 10mA Control output PNP Normally Open Material Brass(nickel plated) Cable Standard/material Standard cable Body length Standard type Weight Approx. 64g (approx. 52g) SKU: n/a -
Distance & Proximity, Sensors
Proximity Sensor LM12 3002 NA
Proximity Sensor LM12 3002 NA switch is composed of three parts: oscillator, switch circuit and magnified output circuit. The oscillator will generate an alternating electric field. When hemetal object approaches this electric field and reaches the induction distance, whirlpool will generate in metal object, resulting in attenuation of vibration and then stop. The change of vibration and stop of oscillator is treated by begird stage magnified circuit and converted to switching sign, triggering driving con-contact detection.
SKU: n/a -
-
Distance & Proximity, Sensors
Proximity Sensor LM8 1.5 DN
- Improve the noise resistance by adopting a dedicated
- The built-in protection circuit of reverse power polarity (DC 3-wire type)
- Built-in surge protection circuit
- Built-in over current protection circuit (DC type)
- Custom Applications Available Please Call For Applications.
SKU: n/a -
Distance & Proximity, Sensors
Ultrasonic Sensor HC-SR04
- Power Supply : 5V DC
- Quiescent Current : <2mA
- Working Currnt: 15mA
- Effectual Angle: <15
- Ranging Distance : 2cm 400 cm/1x13ft
- Resolution : 0.3 cm
- Measuring Angle: 30 degree
- Trigger Input Pulse width: 10uS minimum
- Dimension: 45mm x 20mm x 15mm
SKU: n/a -
