Common Components

BT134 Triac – 600V – 4A (BT134-600E) Triac they are used in AC switching and control applications with current ratings from under 1A to 40A rms. Since TRIACs are bi-directional switching devices they are commonly used for switching AC applications. It has Maximum Terminal current: 4A, Max Terminal Voltage is 600 V, Gate trigger current: 25mA & On-state Gate voltage: 1.7V.

• Maximum Terminal current: 4A
• On-state Gate voltage: 1.4V
• Gate trigger current: 10mA
• Max Terminal Voltage is 600 V
• Holding current: 2.2mA
• Latching current: 4mA
• Available in To-220 Package

• Wide supply voltage range 3.0V to 15V
• Low power 10 nW (typ.)
• High noise immunity 0.45 VDD (typ.)
• Buffered Inputs and Outputs
• Standard Symmetrical Output Characteristics
• 100% Tested for Maximum Quiescent Current at 20V
• 5V, 10V and 15V Parametric Ratings
• Maximum Input Current of 1A at 18V Over Full Package-Temperature Range; 100nA at 18V and +25oC

• Dual inputQuad NAND gate operation.
• Input voltage range: -0.5 to VDD +5V
• Power dissipation of 100mW per logic change.
• It is available in different outline packages
• The propagation delay time is 60ns
• All input and output pins are buffered for high throughput
• The output characteristics are standardized symmetric
• CD4011 draws a maximum input current of 1 Ampere at 18 volts
• Offers different noise margin level according to the input voltage level
• Temperature operating range is -55C to +125C

The CD4024 is a 7-stage ripple-carry binary counter. Buffered outputs are externally available from stages 1 through 7. The counter is reset to its logical 0 stage by a logical 1 on the reset input. The counter is advanced one count on the negative transition of each clock pulse.

The CD4040 is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero state by a logical 1 at the reset input independent of the clock.

The CD4050 hex buffers are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P-channel enhancement mode transistors. These devices feature logic level conversion using only one supply voltage (VDD). The input signal high level (VIH) can exceed the VDD supply voltage when these devices are used for logic level conversions. These devices are intended for use as hex buffers, CMOS to DTL/ TTL converters, or as CMOS current drivers, and at VDD = 5.0V, they can drive directly two DTL/TTL loads over the full operating temperature range.

• High-Voltage Types (20V Rating)
• CD4073BMS Triple 3-Input AND Gate
• CD4081BMS Quad 2-Input AND Gate
• CD4082BMS Dual 4-Input AND Gate
• Medium Speed Operation: tPLH, tPHL = 60ns (typ) at VDD = 10V
• 100% Tested for Quiescent Current at 20V
• Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC

1. Operating Voltage: 5V, 10V, 15V DC
2. Maximum Input Current: 1uA
3. Hysteresis Voltage Typically 0.9 V at VDD: 5 V and 2.3 V at VDD: 10 V
4. Noise Immunity Greater Than 50%
5. Unlimited input rise and fall times

• High Voltage Type (20V Rating)
• 3-State Parallel Outputs for Connection to Common Bus
• Separate Serial Outputs Synchronous to Both Positive and Negative Clock Edges for Cascading
• Medium Speed Operation – 5MHz at 10V (typ)
• Quiescent Current at 20V
• Maximum Input Current of 1A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC
• Noise Margin (Over Full Package/Temperature Range) – 1V at VDD = 5V – 2V at VDD = 10V – 2.5V at VDD = 15V
• 5V, 10V and 15V Parametric Ratings