-
×
12V SPDT Relay 5Pin
1 × ₨ 69 -
×
MQ7 MQ-7 Gas Sensor Detection Module
1 × ₨ 399
Subtotal: ₨ 468
Heart Rate And Muscle Sensors, Sensors
Sensor Cable – Electrode Pads
Availability:
Out of stock
This is simple three conductor sensor cable with electrode pad leads. These cables are 24″ long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set. Dimensions: 24″ Long.
₨ 1,352
Out of stock
Sensor Cable Electrode Pads (3 connector)
Description: This is your simple three conductor sensor cable with electrode pad leads. These cables are 24″ long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set.
Based on 0 reviews
Be the first to review “Sensor Cable – Electrode Pads”
Related products
-
Accelero, Gyro. IMU, Magneto, Sensors
GY-273 Magneto HMC5883L
- Supply Voltage VCC: 3.3 to 6 V
- Heading Accuracy: 1 to 2
- Magnetic Field Range: -8 to +8 Gauss
- I2C Address: 0x1E (7-bit address)
- Max Data Rate: 160 Hz
- Digital Voltage Level: 3.3V
- Dimensions (excluding pins): 18.2mm (0.717) x 13.3mm (0.524) x 2.2mm (0.087)
- Weight: 0.95g (0.034oz)
SKU: n/a -
Accelero, Gyro. IMU, Magneto, Sensors
10 DOF IMU Sensor
3 Axis Accelerometer + 3 Axis Gyroscope + 3 Axis Magnetometer + Pressure Sensor on one board i.e.
ADXL 345+L3G4200D+HMC5883L+BMP085 sensors all in one board. There are also a 2.5V voltage regulator, the logic level converter circuit to make it work under the power of 3V-5V. Thanks to the logic level converter circuit, you can connect it with a 3V-5V MCU directly, just plug and play! Also every interrupt pin of the sensors is leaded out.
SKU: n/a -
Sensors, Weight
Load Sensor – 50kg
- Capacity: 40-50kg
- Comprehensive Error: 0.05mv/v
- Output Sensitivity: 1.0 0.1mv/v
- Nonlinearity: 0.03%FS
- Repeatability: 0.03%FS
- Hysteresis: 0.03%FS
- Creep: 0.03 (3min)%FS
- Zero Drift: 0.03(1min)%FS
- Temp. Effect on Zero: 10 1Zero %FS/
- Temp. Effect on Output: 0.05%FS/10
- Zero Output: 0.1mV/V
- Input Resistance: 1000 20
- Output Resistance: 1000 20
- Insulation Resistance: 5000M
- Excitation Voltage: 10V
- Operation Temp. Range: 0+50
- Overload Capacity: 150%FS
SKU: n/a -
Current & Voltage, Sensors
ACS712 Current Sensor 30A
ACS712 Current Sensor 30A current sensor board is based on the Allegro ACS712ELCTR-30A bi-directional hall-effect current sensor chip that detects positive and negative flowing currents in the range of minus 30 Amps to positive 30 Amps. The board operates at 5V DC and the current flow through the sensor is converted to an output voltage starting at 1/2Vcc (or 2.5V) for no current flow and moves up 66mV per amp for positive current or down -66mV per amp for negative current.
SKU: n/a
There are no reviews yet.