Showing 817–864 of 1337 results
1.Module supply voltage: DC 2V-10V
2.Signal input voltage: DC 1.8-7V
3.Single working current: 1.5A
4.Peak current up to 2.5A
5.Low standby current (less than 0.1uA)
6.Built-in common conduction circuit, the input terminal vacant, the motor does not malfunction
7.Size: 24.7 x 21 x 7mm
8.Mounting hole diameter: 2 mm
A push-button is a simple switch mechanism for controlling some aspect of a machine or a process. It completes an electric circuit when you press on it. When it’s on, a small metal spring inside makes contact with two wires, allowing electricity to flow.
Material: Printed circuit board
Power Mode: 6F22
Display: 128 * 64 LCD backlight
Testing Speed: 2 seconds (1 minute is normal for large capacitor)
Shutdown Current: 20nA
Displayed Value: 25pf-100mF (resolution 1pF)
Inductance: 0.01mH-20H
Resistance: 2100
Power Volatge: 9V layer-built battery / 2 li-ion batteries to form a 8.4V battery pack
Resolution of Resistance Measurement: 0.1 ohms
The Highest Measured Value: 50M ohms
Provided Testing Current: Approx. 6mA
Features:
LED SMD 5m Strips Blue color:
*Easy to Use:
Self-glue back with tape for protected and simple application.
* Cuttable and attachable:
Each 3 LEDs along the cut imprints and, without harming the rest strips.
* Flexible:
Slight and, conservative and adaptable PCB strip.
* Eco-friendly:
Low power utilization and, very brilliant however having in low temperature.
– 4 independent charging channels with built-in micro-computer management system to ensure the high efficiency
– USB output function: Built with 5V / 1000mAh output
– 300mA / 500mA / 700mA / 1000mA charging current for selection
– CC / CV charge mode to maintain a constant current flow and protect battery and users’ safety
– full Fledged LCD display with a variety of info
– Refresh function for 0V battery
– Quick test mode – 4 channels detect the battery capacity quicker than the Nor mode
– Identifies broken batteries, 0V rechargeable battery activation, can’t charge 1.65 – 1.85V batteries
– Protections: over-charge, over-discharge, reverse polarity, short circuit protections, temperature control
– Charging between 1.65 – 2.2V / bad battery recognition and activation
Specification:
| Weight | : | <b>141 GRM |
For DJI PHANTOM Quadcopter, in no-load and load conditions can be effectively enhanced blank time
Suitable for CX-20, Quanum Nova Quadcopter
Special for DJI PHANTOM 1 and FC40 Quadcopter,improve about 30% flight time than original battery
Well-designed,have a special handle for take out the battery easily
Capable of maximum continuous discharge rates up to 50C,burst rate 60C, placing this battery among the most powerful Li-Po battery packs in its class! It offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there?s a battery perfect for almost any application from indoor slow flyer to large-scale sport and aerobatic airplane models, as well as micro to mid-sized helicopter models.
This is the lowest cost of Lithium Polymer (LiPo) rechargeable battery that we have ever carried, so that it is affordable for students to use in their projects instead of using the disposable 9V battery that cannot be recharged. It is suitable for low power consumption usage such as circuit board, sensors and micro size DC motors.
Proximity switches are the most common solution for non-contact detection. The inductive type is the widely used proximity switch, which uses electromagnetic waves to detect the metal object near the sensor detection surface. In application, this is a very simple technology to detect 1”~2” metal objects.
L293D L293-D Dual H-Bridge Motor Driver 
L298N Motor Driver Module 
Large Push Button (2 Pin) 
