Sensors
Showing 1–24 of 152 results
-
Accelero, Gyro. IMU, Magneto, Sensors
10 DOF IMU Sensor
3 Axis Accelerometer + 3 Axis Gyroscope + 3 Axis Magnetometer + Pressure Sensor on one board i.e.
ADXL 345+L3G4200D+HMC5883L+BMP085 sensors all in one board. There are also a 2.5V voltage regulator, the logic level converter circuit to make it work under the power of 3V-5V. Thanks to the logic level converter circuit, you can connect it with a 3V-5V MCU directly, just plug and play! Also every interrupt pin of the sensors is leaded out.
SKU: n/a -
-
Sensors, Soil
3 In 1 Soil NPK Sensor Probe For Agricultural Nitrogen Phosphorus Potassium Kit
- Power supply: 5-30VDC
- Maximum power consumption: ≤0.15W
- Operating temperature: -40~80℃
- NPK parameters:
- Range: 0-1999 mg/kg(mg/L)
- Resolution: 1 mg/kg(mg/L)
- Precision: ±2%FS
- Response time: ≤1S
- Protection grade: IP68
- Probe material: 316 stainless steels
- Sealing material: Black flame-retardant epoxy resin
- Default cable length: 2 meters, cable length can be customized.
- Dimensions: 45*15*123mm
- Output signal: RS485/4-20ma/0-5v/0-10v
SKU: n/a -
Arduino & IOT Boards, Kits, Module, Sensors
37 in 1 Sensor Module Board Set Kit For Arduino Card Board Box
Arduino & IOT Boards, Kits, Module, Sensors37 in 1 Sensor Module Board Set Kit For Arduino Card Board Box
This 37 In 1 Sensor Module Kit for Arduino is supplied with a variety of sensors that are compatible with Arduino Boards. This is the most complete performance starter kit with all the essential Arduino sensors.
It comprises 37 Pcs essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product.
Tons of updated lessons and Arduino codes are available on Google and YouTube for free. It is extremely easy for Arduino fancier to control and use these modules. This kit will help you control the physical world with sensors.
SKU: n/a -
-
-
Arduino & IOT Boards, Current & Voltage, Sensors
50A SCT-013-000 Non-invasive AC Current Clamp Sensor
Arduino & IOT Boards, Current & Voltage, Sensors50A SCT-013-000 Non-invasive AC Current Clamp Sensor
- Input Current: 0~50A AC
- Output Mode: DC 0~1V
- Non-linearity：2-3%
- Build-in sampling resistance（RL): 62Ω
- Turn Ratio: 1800:1
- Resistance Grade: Grade B
- Work Temperature: -25°C ~ ﹢70°C
- Dielectric Strength(between shell and output): 1000V AC/1min 5mA
- Leading Wire in Length: 1m
- Open Size: 13mm x 13mm
SKU: n/a -
Sensors, Soil
7 in 1 Soil Integrated Sensor EC PH NPK Moisture Temperature Meter
- High precision agriculture sensors, rapid response, good exchange ability
- Good tightness, corrosion resistance, the soil tester can be used in the soil for a long time.
- Flame retardant epoxy resin curing, completely waterproof, the soil tester can withstand strong external impact.
- Steel needles are made of high quality materials that can with stand long-term electrolysis , acid and alkali corrosion in soil.
SKU: n/a -
Current & Voltage, Sensors
ACS712 Current Sensor 20A
- Module Dimensions: 31 x 13 x 14 mm (LxWxH)
- Weight: 3 gm.
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: -20A~ 20A
- Sensitivity: 100mV/A
- The current sensor chips: ACS712_ELC-20A.
- Pin 5V power supply, onboard power indicator.
- There is no the detection current through, the output voltage is VCC / 2.
- The module can be measure plus or minus 20 amps, corresponding to the analog output of 185 mV / A.
SKU: n/a -
Current & Voltage, Sensors
ACS712 Current Sensor 30A
ACS712 Current Sensor 30A current sensor board is based on the Allegro ACS712ELCTR-30A bi-directional hall-effect current sensor chip that detects positive and negative flowing currents in the range of minus 30 Amps to positive 30 Amps. The board operates at 5V DC and the current flow through the sensor is converted to an output voltage starting at 1/2Vcc (or 2.5V) for no current flow and moves up 66mV per amp for positive current or down -66mV per amp for negative current.
SKU: n/a -
Current & Voltage, Sensors
ACS712 Current Sensor 5A
- Module Dimensions: 31 x 13 x 14 mm (LxWxH)
- Weight: 3 gm.
- Supply Voltage: 4.5V~5.5V DC
- Measure Current Range: -5A~ 5A
- Sensitivity: 66mV/A
- The current sensor chips: ACS712_ELC-05B.
- Pin 5V power supply, onboard power indicator.
- There is no the detection current through, the output voltage is VCC / 2.
SKU: n/a -
Others, Sensors
AH175 Hall Sensor
Hall effect sensor is transducing devices used to detect and generate a voltage when in the presence of a magnetic field. They are designed to induce a voltage as an output when a magnetic field is present at its input. The output voltage can be variable depending on the magnitude of the magnetic field. Hall effect sensors, as they name states are effect sensors, which can be used to sense different categories, like speed, position of objects, rotational speed or frequency and be used as a fault detector. They can be used to detect a time-varying current, as time-varying current produce magnetic fields, which can then be sensed by the Hall effect transducer and produce a voltage with some proportion the amount of magnetic field present at the sensor.
SKU: n/a -
Distance & Proximity, Light, Sensors
APDS9960 proximity and light intensity sensor I2C 3.3V
- Gesture recognition using reflected IR
- Digital proximity sensing using reflected IR
- Separate Red/Green/Blue light intensity sensors
- Ambient (clear) light intensity sensor
- IR light-blocking filter
- Interrupt output available
- I2C interface with good library support
- 3.3V operation
SKU: n/a -
Arduino & IOT Boards, Module, Others, Sensors, Shields
Arduino Sensor Shield
- It has a Pin 13 LED pilot.
- It has D0-D13 IO ports.
- A0-A5 analog IO ports.
- It contains a reset button.
- It also contains a Power LED.
- It has an SD card interface.
- It contains an Ultrasonic interface.
- This expansion board has an RS232 interface.
- It has a Bluetooth interface.
- It has an APC220 interface.
- IIC interface.
- 12864 LCD Parallel interfaces.
- It contains 12864 LCD Serial Interface
SKU: n/a -
Arduino & IOT Boards, Light, Sensors
Automatic Photocell Street Light Sun Switch Sensor 12V or 220V
- Its color is white and blue.
- Its size is 5 x 4.2 x 3.3 cm.
- Its input voltages are AC 220V or DC 12V.
- Its maximum load current is 10A.
- Its frequency range is 50 to 60 Hz.
- It is widely used in street lighting, highways, factories, gardens, ports, airports, farms, parks, schools, and other places.
SKU: n/a -
Heart Rate And Muscle Sensors, Sensors
Biomedical Sensor Pad (10 pack)
This is a 10 pack of Biomedical Sensor Pads, disposable electrodes that can be used to measure EEG, ECG and EMG levels. these little pads are perfect for short-term monitoring of Neurofeedback and Biofeedback purposes. They are to be used once and are very handy because of integrated, latex-free gel. Each pad adheres very well to the skin and the snap connector can be pushed on or removed from the electrode lead with no issue.
SKU: n/a -
-
-
Optical Sensors/Photo Transistors, Sensors
Color Mark Sensor Z3n-Tb22
Z3N colour mark photoelectric sensor can be widely used in bag-making machines, cutting machines, packaging machinery, pharmaceutical machinery, compound machinery and other machinery for colour standard tracking and edge tracking, following the line deviation correction
SKU: n/a -
Arduino & IOT Boards, Boards, Sensors, WIFI Modules
D1 Mini V3 Nodemcu Wifi Esp8266ex Usb Ch340c.
D1 mini is a breadboard which is compatible with WiFi development board on the ESP8266. It is a mini Arduino with WiFi module and has one analog port and 11 digital ports. t runs from 5V or 3.3V. Logic levels are 3.3V for all ports.
SKU: n/a -
