Shop
Showing 961–992 of 1338 results
-
ICs
NE556 Dual Timer IC
- A dual version of NE556 consists of two precision timers that operate in both monostable and astable modes.
- It is specified for operation from 4.5 V to 16 V.
- TTL compatible output which can source or sink current of up to 150mA.
- Adjustable duty cycle.
- It can produce a timing delay from microseconds to hours.
- The operating temperature range is from 0 to 70 degrees Celsius.
- It has temperature stability better than 0.005% per C.
SKU: n/a -
-
-
Incubator, Mist Makers & Humidifiers
New Ultrasonic Humidifier 3L with LED Lamp Humidifier for Portable Diffuser Mist Maker
Incubator, Mist Makers & HumidifiersNew Ultrasonic Humidifier 3L with LED Lamp Humidifier for Portable Diffuser Mist Maker
- Beauty: Refresh skin, which can be taken as skin care, keeping skin healthy and moist.
- Decoration: Choose the design you like to make the room romantic.
- Humidify: Humidify the air during summer and winter at your home, and refresh the quality of breathing air.
- Purify: Neutralizes static, and reduces infection of the skin.
- Relief: Aroma therapy, relieves stress.
SKU: n/a -
IOT Boards
NODEMCU LUA WIFI BOARD BASED ON ESP8266 CP2102 MODULE
- Wi-Fi Module The ESP-12E module is similar to the ESP-12 module but with 6 extra GPIOs.
- USB micro USB port for power, programming, and debugging
- Headers 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins
- Misc Reset and Flash buttons
- Power 5V via micro USB port
- Dimensions 49 x 24.5 x 13mm
SKU: n/a -
IOT Boards
Nodemcu WROOM ESP32 Wifi Based Microcontroller Development Board
- Universal low power IoT sensor hub.
- Home automation.
- Universal low power IoT recorder.
- Mesh network.
- Video streaming of the camera.
- Industrial wireless control.
- OTT TV box / set-top box device.
- Baby monitor.
- Smart Socket.
- Sensor networks.
- Wi-Fi toys: Counters, toys, Anti-lost device.
- Wearable electronic products.
- Wi-Fi speech recognition device.
- Wi-Fi location-aware devices.
SKU: n/a -
Wires & Connectors
Nokia Charging Jack
- Manufactured using high quality and excellent durable materials.
- Perfect replacement for the original Charging Connector.
- Precision machining fits the cell phone perfectly.
- High-quality OEM product, tested and quality checked for each piece before shipping.
- This part is not returnable so please be sure that you are purchasing the proper & correct part for your specific device.
- The image shown is for presentation purposes only, the actual product will be different from what shown in the image.
SKU: n/a -
Communication Modules, RF Modules
NRF24L01 2.4GHz Wireless Transceiver Module
- Worldwide 2.4GHz ISM band operation Free license to use.
- 126 RF channels.
- High air data rate: 250kbps, 1 and 2Mbps.
- Transmitter: 11.3mA at 0dBm output power.
- Receiver: Fast AGC for improved dynamic range.
- Receiver: Integrated channel filters.
- Enhanced ShockBurst:1 to 32 bytes dynamic payload length,6 data pipe MultiCeiver for 1:6 star networks.
- Host Interface:4-pin hardware SPI,3 separate 32 bytes TX and RX FIFOs.
- Low Power Management:1.9 to 3.6V supply range.
- GFSK modulation.
- Auto packet transaction handling.
- Easy to design.
- Small size:15mm*29mm.
SKU: WRE335 -
Communication Modules, RF Modules
NRF24L01 Antenna Pair
This is NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub 26A power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01 provides a true ULP solution enabling months to years of battery life when running on coin cells or AA/AAA batteries. These RF modules are very popular among the Arduino tinkerers. The nRF24L01 is used on a wide variety of applications that require wireless control. They are transceivers which this means that each module can transmit and receive data.
SKU: n/a -
Breakout Boards
nRF24L01 Breakout Adapter with On-board 3.3V Regulator
- Addicore nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- On-board 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
- On-Board Voltage Regulator: Voltage Regulator Input Voltage (connected to VCC): 4.8V to 12V
- Voltage Regulator Input Voltage Max: 15V (we recommend staying below 12V)
SKU: n/a -
Heat, Sensors
NTC 10K Ohm 103 5% THERMISTOR TEMPERATURE SENSOR
- Standard Type
- Linear Response Curve
- Temperature Range: -55C to +125C
- Rated Power: 0.5W
- RoHS Compliant
- Resistance: 10K ohm
- Resistance Tolerance: +/- 5 %
- B Constant: 3435K
- B Constant Tolerance: +/- 1 %
- B Constant Class: B25/50
- Temperature Range: -30 to +125 degree C
- Thermistor Type: NTC Thermistor
SKU: n/a -
Display, LCDs & OLEDs
OLED Display Module 12864 0.96 Inch 4Pin
- No need of the backlight
- The display is self-illuminating
- Power requirement is low
- They are offering the large viewing angle
- Full Compatible with Arduino
- Factory configured for SPI protocol (can easily change to IIC)
- Better performance characteristics than traditional LCD and LED displays.
- Only Need 2 I/O Port Control
SKU: n/a -
Mega Payday Sale, Optical Sensors/Photo Transistors, Sensors
OMRON E3Z-D62 100 MA MAX Output 12 VDC to 24 VDC PHOTOELECTRIC Sensor
Mega Payday Sale, Optical Sensors/Photo Transistors, SensorsOMRON E3Z-D62 100 MA MAX Output 12 VDC to 24 VDC PHOTOELECTRIC Sensor
- IP67 rated PBT housing with methacrylate lens
- PNP and NPN output configurations
- Light ON/dark ON selectable
- Small dead-band for sensing close targets
- Retro-reflective versions have a polarised light source for shiny object detection
- Short circuit and reverse polarity protection
- Mutual interference protection (retro and diffuse versions only)
- Operating temperature range -25 °C → +55°C
SKU: n/a -
ICs
OPTOCOUPLER 817 QUAD
Optocoupler 817 QUAD contains an IRED optically coupled to a phototransistor. It is packaged in a 4pin DIP, available in wide-lead spacing option and SMT gullwing lead-form option. Input-output isolation voltage(rms) is 5.0kV. Collector-emitter voltage is 80V(*) and CTR is 50% to 600% at input current of 5mA.
SKU: n/a -
Soldering Accessories & Tools, Soldering Iron
ORIGINAL SOLDERING IRON 25WATTS SP25D WELLER USA 25W
ORIGINAL SOLDERING IRON 25WATTS SP25D WELLER USA 25W long- Featherweight iron with pencil handle- Ideal for hobbies, kits and radios- MT1 3mm diameter replaceable nickel-plated copper tip- Develops 750?F/400?C- Stainless steel barrel- Heat and impact resistant handle
SKU: n/a -
Soldering Accessories & Tools, Soldering Iron
Original TQ95 Soldering Iron – High Precision & Adjustable Temperature
Soldering Accessories & Tools, Soldering IronOriginal TQ95 Soldering Iron – High Precision & Adjustable Temperature
- 2-stage heat system – 20W standard / 200W boost
- Ceramic heater for fast and even heating
- Ergonomic, non-slip handle for maximum comfort
- Includes replaceable TQ-77RT-B tip
- 1.5m high-temp silicone power cord
- Compact 210mm length (excluding cord bushing)
- Ultra-lightweight – only 65g (without cord)
SKU: n/a -
Bread Board, circuit boards
OTH20 170 Tie Points Mini Breadboard
- This is a tiny breadboard, measuring approximately 1.8″ x 1.4″ (46mm x 36mm).
- It is half the size of a regular half-size breadboard.
- The mini breadboard is perfect for small projects and can be easily attached to the top of an Arduino proto shield.
SKU: n/a -
Distance & Proximity, Mega Payday Sale, Sensors
Outdoor 12V Infrared PIR Motion Sensor Switch
-
Detection range : 180
-
Operating voltage : 12V
-
Detection distance : 15m (24) (adjustable)
-
Delay Time : 15 seconds to 7 minutes (adjustable)
-
Installation height :1.8m 2.5m
-
Material : ABS
-
Dimensions : 60 x 47 x 156mm
-
Installation : open type, (hole 16mm) installation, adjusting for the next button
SKU: n/a -
-
Batteries & Chargers
Pack of 2 Camelion Battery AA 1.5V
- Battery with high construction technology to long life
- Do not contain mercury, cadmium (environmentally harmful)
- AA batteries 1.5 V LR06
- High performance, designed for applications in the medium and high absorption
- Resistant to heat and cold
- Non-Rechargeable
SKU: n/a -
Audio Amplifier
PAM8403 Amplifier 3W Digital Power Audio
- Operating Voltage: Wide power supply ranges from 2.5V to 5.5V DC
- Dual-channel stereo with high output power (3W+3W Output at 10% THD with a 4 Load @5v DC)
- Max Gain 24 dB.
- Filterless architecture
- Low Quiescent Current and Low EMI
- Operating Temperature: -40 to +85C
- Short Circuit Protection
- Thermal Shutdown
- Superior Low Noise
- Efficiency up to 90%
- Dimensions (LxWxH) in cm 2.1 x 1.8 x .3
SKU: n/a -
Audio Amplifier
PAM8403 with knob
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)
- On-board Volume Control with Built-in Power Switch
- Good sound quality
- Can use computer USB for power supply directly. Double panel wiring solves crosstalk
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4 Load and 5V Power Supply
- Filterless, Low Quiescent Current and Low EMI
- Low THD+N
- Superior Low Noise
- Efficiency up to 90%
- Short Circuit Protection
- Thermal Shutdown
SKU: n/a -
Audio Amplifier
PAM8610 12V Dual Channel Stereo Audio Amplifier Board
- Main Chip: PAM8610
- Power Range: DC 6V-15V (self-protection)
- Recommended Voltage: DC 12V(2A)
- Output Power: 10Wx2(8) 15Wx2(4)
- Frequency Response:20HZ-15KHZ
- Static Current: 20MA (DC12V)
- SNR: 90% Recommended
- Speakers: 10-100W
- Input Impedance: 15K
- Output Impedance: 4-8
- Harmonic Distortion: <0.1%
- Dimensions in mm (LxWxH): 30 x 25 x 4
- Weight(gm): 12
SKU: n/a
EdCharger – Charging & Storage Solution for Edison V3 Robots
CW2000 Nickel Conductive Pen | CircuitWorks / Chemtronics – 9 g (0.32 oz) – Trace Repair & Prototyping
GY521 MPU6050 Module 6DOF
4 Pin Crimp Shell Wire | Straight Connector
2" Propeller For DC Motor
BTS 7960 Motor Driver 43A
MG90S Metal Gear Micro Servo Motor
CH341 EEPROM Flash BIOS USB Programmer
Raspberry PI Camera with IR 


























