-
×
TCRT5000 LFR Sensor
1 × ₨ 119 -
×
Soldering Paste (80gm)
1 × ₨ 249
Subtotal: ₨ 368
Shop
Showing 1105–1152 of 1337 results
-
Current & Voltage, Sensors
SCT-013 30A
- Core Material: Ferrite
- External Material : ABS
- Input Current : 30A
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Working Temperature -25-70°C
- Cable Length : Approx. 1.18m/ 45.4″
- Total Size : Approx. 60 x 30 x 20 mm.
SKU: n/a -
Current & Voltage, Sensors
SCT-013-000 Non-invasive AC Current Clamp Sensor 20A
AC Current Signal Conversion Module
- Input Voltage (VCC): 3.3V-5.5V
- Interface: Gravity Analog (PH2.0-3P，analog voltage output 0.2-2.8V DC)
- AC Voltage Input Range: 0-1V (AC RMS)
- Relative Error: +/- 4%
- Dimension: 32×27 mm
- Weight: 5g
Open Type AC Transformer Probe
- AC Current Range: 0-20A
- Signal Output (standard Φ3.5mm 3P plug): 0-1V AC voltage, linear corresponding range 0-20A
- Accuracy: ±1%
- Non-linearity: ≤±0.2%
- Frequency Range: 50Hz~1kHz
- Cable Length: 1m
- Working Temperature: -25 ℃~+70 ℃
- Opening Size: 13×13 mm / 0.51×0.51 in
- Weight: 50g
SKU: SEN506 -
Arduino & IOT Boards, Current & Voltage, Sensors
SCT013-000 CT 100A Non-invasive AC Current Sensor
- Core Material: Ferrite
- External Material : ABS
- Input Current : 100A
- Frequency: 50HZ-150KHZ
- Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W)
- Output Plug 3.5mm
- Dielectric Strength 6000V AC/1min
- Working Temperature -25-70°C
- Cable Length : Approx. 1.18m/ 45.4″
- Total Size : Approx. 60 x 30 x 20 mm.
SKU: n/a -
Card Readers, Pen drives
SD Card Reader
SD Card Reader With its stylish, compact design and generous capacity, the Crozer Blade USB Flash Drive makes it easy to back up, transfer, and share your files. This USB drive lets you carry your photos, movies, music, and personal data wherever you go.
SKU: n/a -
Heart Rate And Muscle Sensors, Sensors
Sensor Cable – Electrode Pads
This is simple three conductor sensor cable with electrode pad leads. These cables are 24″ long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set. Dimensions: 24″ Long.
SKU: n/a -
ICs
Serial EEPROM AT24C02
- Low-voltage and Standard-voltage Operation
- 2.7 (VCC = 2.7V to 5.5V)
- 1.8 (VCC = 1.8V to 5.5V)
- Internally Organized 128 x 8 (1K), 256 x 8 (2K), 512 x 8 (4K),
- 1024 x 8 (8K) or 2048 x 8 (16K)
- Two-wire Serial Interface
- Schmitt Trigger, Filtered Inputs for Noise Suppression
- Bidirectional Data Transfer Protocol
- 100 kHz (1.8V) and 400 kHz (2.7V, 5V) Compatibility
- Write Protect Pin for Hardware Data Protection
- 8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) Write Modes
- Partial Page Writes Allowed
- Self-timed Write Cycle (5 ms max)
- High-reliability
- Endurance: 1 Million Write Cycles
- Data Retention: 100 Years
- Automotive Devices Available
- 8-lead JEDEC PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2×3), 5-lead SOT23, 8-lead TSSOP and 8-ball dBGA2 Packages
- Die Sales: Wafer Form, Waffle Pack and Bumped Wafers
SKU: n/a - Low-voltage and Standard-voltage Operation
-
Common Components, ICs
SG3525 / KA3525 PWM Controller IC in Pakistan
- DUAL SOURCE/SINK OUTPUT DRIVERS
- LATCHING PWM TO PREVENT MULTIPLE PULSES
- PULSE-BY-PULSE SHUTDOWN
- INTERNAL SOFT-START
- 8 TO 35 V OPERATION
- 100 Hz TO 500 KHz OSCILLATOR RANGE
- 5.1 V REFERENCE TRIMMED TO 1 %
- ADJUSTABLE DEADTIME CONTROL
- INPUT UNDERVOLTAGE LOCKOUT WITH HYSTERESIS
- SEPARATE OSCILLATOR SYNC TERMINAL
SKU: n/a -
Servo Motor
Sg90 Servo Mounting Bracket
- -Perfect fit for SG90 servos
- -With extension holes for sensors can install a Bracket for sensors
- -Material: Nylon
- -2 Axis servo bracket
- -You need to assemble the parts by yourself
- -Pan / Tilt PT camera platform mount anti-vibration camera for FPV aircraft
- -Dual axis platform 20g suitable for 9g servos. 12g precision and great appearance no shaking with a servo wire clamp.
- -or horizontal direction I recommend MD260 260-degrees metal digital servo wide angle to see more for the perpendicular direction you can use ordinary ES08A plastic servo control chip.
SKU: n/a -
Communication Modules, GSM and GPS
Sim 800A GSM
The SIM800A Quad-Band GSM/GPRS Module with RS232 Interface is a complete Quad-band GSM/GPRS solution in an LGA(Land grid array) type which can be embedded in the customer applications. SIM800A support Quad-band 850/900/1800/1900 MHz, it can transmit Voice, SMS and data information with low power consumption
SKU: n/a -
Communication Modules, GSM and GPS
SIM800L GSM Module Micro Sim Card Board
- Module models: SIM800L (latest module, performance than SIM900)
- Operating voltage: 3.7 to 4.2 V (peak current is 2A)
- Support network: China mobile, China Unicom
- Module size: 2.2 x 1.8cm
- TTL serial port can directly link to MCU. Don’t need a MAX232
- Power on automatic startup, automatic search network
- Onboard one channel indicator light (with signal slow flash, no signal quickly flash)
SKU: n/a -
ESC, Multicopter Accesories
SimonK ESC 30A
30A SimonK Prgramme RC Brushless ESC For Quadcopter Multicopter
Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate.
16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal).
Super simple, foolproof operation! Nothing to program other than the throttle range.
SKU: n/a -
-
IR & Vision, Sensors
SM3382 IR Receiver Modules for Remote Control
- Very low supply current
- Photodetector and preamplifier in one package
- Internal filter for PCM frequency
- Improved shielding against EMI
- Supply voltage: 2.5 V to 5.5 V
- Improved immunity against ambient light
- Insensitive to supply voltage ripple and noise
SKU: n/a -
Push Switches, Switches And Buttons
Small Push button (2 Pin)
A push-button is a simple switch mechanism for controlling some aspect of a machine or a process. It completes an electric circuit when you press on it. When it’s on, a small metal spring inside makes contact with two wires, allowing electricity to flow.
SKU: n/a -
-
Batteries & Chargers
Smart Battery Charger SY-1205
Compatible with 90%(lead-acid, GEL batteries) on the market, supporting charging of 5AH,10AH,20AH,40AH,60AH,70AH, and 80AH batteries(Best charging current is 0.1*battery capacity to 0.25*battery capacity, though)With MCU 3-stage charging smart chip, automates and controls the whole charging process, automatically cut-off charging when charged fully. With reverse connection protection, when connected to the battery terminals with battery clamps, it can prevent damage to the charge. With short-circuit protection, when the charged load has a short-circuit defect, the charger will automatically power off to stop output, and when the short-circuit is removed, it automatically continues to work.
SKU: n/a -
ICs
SN74125 Buffer & Line Driver IC
- Technology Family: LS
- VCC (Min): 4.75V
- VCC (Max): 5.25
- Channels (#): 4
- Operating Voltage (Nom): 5V
- Frequency at normal voltage (Max): 35MHz
- Propagation delay (Max): 20ns
- IOL (Max): 24mA
- IOH (Max):-2.6mA
- Input Type: Bi-polar
- Output type: 3-State
- High speed (tpd 10-50ns)
- Rating: Catalog
- Data rate: 70Mbps
- Available in 14-pin PDIP, GDIP, PDSO packages
SKU: n/a -
ICs
SN74HC241 Buffer & Line Driver IC
These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The HC241 devices are organized as two 4-bit buffers/drivers with separate output-enable (1OE and 2OE) inputs. When 1OE is low or 2OE is high, the device passes noninverted data from the A inputs to the Y outputs. When 1OE is high or 2OE is low, the outputs for the respective buffers/drivers are in the high-impedance state.
SKU: n/a -
ICs
SN74LS138 Demultiplexer IC
- Technology Family: LS
- Rating: Catalog
- Supply voltage: 1.0V to 5.5V
- Frequency at nominal voltage: 35 MHz
- Typical propagation delay: 21nS
- Low power consumption: 32mW
- Operating temperature: -40ºC to +125ºC
- ESD protection
- Balanced propagation delays
- Designed specifically for high speed
- Channels (#): 1
- Configuration: 3:8
- Product type: Standard
SKU: n/a -
-
Adapters/Power Supply Modules
Solar Charge Controller 10A
- Automatically manage the working of solar panel and batteries in solar system.
- Overloading and short-circuit protection.
- Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection.
- Protection from lightning strike.
- Prolong the battery life cycle and keep the load work well.
- Easy to set up and operate.
- Suitable for small solar energy system.
SKU: n/a -
Pumps, Water Pumps
Solar water pump or air cooler pump DC 12V 8watt, Shafi
This awesome water pump comes with an adjustable flow and is easy to clean. Strainer protects impeller from damage. Shell is made of high-quality ABS plastic. This pump is a totally submersible flow-adjustable water pump. The motor will automatically cut off the power if it is overheating. The flow can be up to 212GPH. It has good waterproof, has high dielectric strength, and is safe and reliable. Suitable for acid, alkali, and salt environments.
SKU: n/a -
Desoldering Pump
Solder Sucker Desoldering Pump Tool
Brand new
Material: Metal
Length: approx. 190mm
Temperature Range: 100℃ Max.
Suction Force: 500 cm-Hg
Feature:
Providing safe, low cost means of desoldering connections, PC boards and components.
Large capacity spring-loaded plunger quickly removes solder in a single action.
Tool easily disassembles for fast cleaning, tip and ring replacement.
Internal plunger pin automatically purges solder from tip with each use.
Powerful suction for solder removal. Fine workmanship and good performance.
Light in weight. Easy to use.
Durable in use.
Ideal for all types of repairing.
Ideal for heavy use including production re-work and repair.
Package included: 1 x Solder Remover
SKU: n/a -
Soldering Iron
Soldering Iron 30W
A soldering iron is a hand tool used in soldering. The power rating of this soldering iron is 30W.
Features:
- Soldering iron with 30W power and replaceable tip
- Simple soldering of printed circuit boards/components, using the de-soldering suction pump
Convenient storage when not in use - Power supply: 220 to 240V (don’t support 110V)
- RoHS and CE Approved
SKU: n/a -
-
Soldering Accessories & Tools, Soldering Kits
Soldering iron kit – best quality soldering iron 30W/40W/60W – electric soldering iron past – 0.8mm solder wire for DIY projects and tools
Soldering Accessories & Tools, Soldering KitsSoldering iron kit – best quality soldering iron 30W/40W/60W – electric soldering iron past – 0.8mm solder wire for DIY projects and tools
Upgrade your DIY experience with our premium Soldering Iron Kit! This all-in-one solution includes the best quality soldering irons available in 30W, 40W, and 60W options. Perfect for electrical and electronics projects, this kit combines superior performance, durability, and user convenience.
SKU: n/a -
Iron Stand
Soldering Iron Stand Normal Round
Features of Soldering Iron Stand :
- Made of all metal, suitable for a variety of electric soldering irons
- The bottom screw is fixed, safe and non-slip, and it is stable.
- Easy to use, easy to clean, easy to disassemble
- Can freely match with various kinds of soldering iron with different lengths of handles.
- Iron sheet metal stamping type is also very stable, more beautiful.
- Iron stand is very stable and strong, with ultra-long life.
- Material: metal iron
SKU: n/a -
