Sensors Archives - Page 3 of 4

“NTC 10K Ohm 103 5% THERMISTOR TEMPERATURE SENSOR” has been added to your cart. View cart

Gas Sensor, Sensors
MQ3 MQ-3 Gas Sensor Module
Gas Sensor, Sensors
MQ3 MQ-3 Gas Sensor Module

0 out of 5
(0)

Model No.: MQ-3

Dimensions: 36 x 20 x 21 mm (LxWxH)

Weight: 6gm

Heater voltage: 50.2V (AC DC)

Loop voltage: 24V (DC)

Load resistance: adjustable

Heating Resistance: 31 3 (Room temperature)

Heating Power: 900mW

Surface thermal resistance: 2Kohm-20Kohm (0.4mg/L alcohol)

Sensitivity: Rs (in air)/Rs (0.4mg/L alcohol) 5

Working temperature: 20 degrees 2 degree

Humidity: 65% 5%RH

Signal output light indicator.

Analog and level signal output.

TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module).

The carbon monoxide detection with better sensitivity.

Has a long service life and reliable stability.

Rapid response recovery features.

SKU: n/a
₨ 329 ~~₨ 510~~
Add to cart
Gas Sensor, Sensors
MQ7 MQ-7 Gas Sensor Detection Module
Gas Sensor, Sensors
MQ7 MQ-7 Gas Sensor Detection Module

0 out of 5
(0)

Product Name: Gas Sensor Module;

Model: MQ-7;

Type: Analog

Detecting Type : Carbonic Oxide(Co);

Rated Voltage: DC 5V;

Rated Current: 180mA

Detecting Range: 100-1000ppm;

Pin Quantity: 4;

Pin Spacing: 1.8mm/ 0.07″

Pin Definition: AO-analog Output, DO-Digital Output, GND- Ground, VCC-Voltage To Current Converter ;

Total Size: 35 x 20 x 21mm/ 1.4″ x 0.79″ x 0.83″ (L*W*H)

SKU: n/a
₨ 399 ~~₨ 468~~
Add to cart
Heat, Sensors
NTC 10K Ohm 103 5% THERMISTOR TEMPERATURE SENSOR
Heat, Sensors
NTC 10K Ohm 103 5% THERMISTOR TEMPERATURE SENSOR

0 out of 5
(0)

Standard Type

Linear Response Curve

Temperature Range: -55C to +125C

Rated Power: 0.5W

RoHS Compliant

Resistance: 10K ohm

Resistance Tolerance: +/- 5 %

B Constant: 3435K

B Constant Tolerance: +/- 1 %

B Constant Class: B25/50

Temperature Range: -30 to +125 degree C

Thermistor Type: NTC Thermistor

SKU: n/a
₨ 29 ~~₨ 47~~
Add to cart
Mega Payday Sale, Optical Sensors/Photo Transistors, Sensors
OMRON E3Z-D62 100 MA MAX Output 12 VDC to 24 VDC PHOTOELECTRIC Sensor
Mega Payday Sale, Optical Sensors/Photo Transistors, Sensors
OMRON E3Z-D62 100 MA MAX Output 12 VDC to 24 VDC PHOTOELECTRIC Sensor

0 out of 5
(0)

IP67 rated PBT housing with methacrylate lens

PNP and NPN output configurations

Light ON/dark ON selectable

Small dead-band for sensing close targets

Retro-reflective versions have a polarised light source for shiny object detection

Short circuit and reverse polarity protection

Mutual interference protection (retro and diffuse versions only)

Operating temperature range -25 °C → +55°C

SKU: n/a
₨ 3,400 ~~₨ 6,843~~
Add to cart
Optical Sensors/Photo Transistors, Sensors
ON Semiconductor L14G3
Optical Sensors/Photo Transistors, Sensors
ON Semiconductor L14G3

0 out of 5
(0)

L14G3

PHOTO TRANSISTOR

PACKAGE/CASE:3-TO-18

LEADED PROCESS COMPATIBLE: NO

PEAK REFLOW COMPATIBLE (260 C): NO

CURRENT RATING:2MA

MOUNTING TYPE: THROUGH HOL

SKU: n/a
₨ 299 ~~₨ 468~~
Add to cart
Distance & Proximity, Mega Payday Sale, Sensors
Outdoor 12V Infrared PIR Motion Sensor Switch
Distance & Proximity, Mega Payday Sale, Sensors
Outdoor 12V Infrared PIR Motion Sensor Switch

0 out of 5
(0)

Detection range : 180

Operating voltage : 12V

Detection distance : 15m (24) (adjustable)

Delay Time : 15 seconds to 7 minutes (adjustable)

Installation height :1.8m 2.5m

Material : ABS

Dimensions : 60 x 47 x 156mm

Installation : open type, (hole 16mm) installation, adjusting for the next button

SKU: n/a
₨ 899 ~~₨ 1,872~~
Read more
Others, Sensors
Pack of 5 27mm Piezo Electric Plate
Others, Sensors
Pack of 5 27mm Piezo Electric Plate

0 out of 5
(0)

Product type: Piezoelectric Transducer Piezo Sensor

Colour: copper and silver

Dimension: 27 mm

Weight: 2 g

Sheet material: bronze

Package contains: 1 x piezoelectric sensor

SKU: n/a
₨ 330 ~~₨ 416~~
Add to cart
Arduino & IOT Boards, Module, Sensors, Water
Ph Sensor Gravity Sensor Module
Arduino & IOT Boards, Module, Sensors, Water
Ph Sensor Gravity Sensor Module

0 out of 5
(0)

Module Power: 5.00V

Module Size : 43 x 32mm(1.69×1.26″)

Measuring Range :0 – 14PH

Measuring Temperature: 0 – 60 ℃

Accuracy : ± 0.1pH (25 ℃)

Response Time: ≤ 1min

pH Sensor with BNC Connector

pH2.0 Interface ( 3 foot patch )

Gain Adjustment Potentiometer

Power Indicator LED

SKU: n/a
₨ 5,999 ~~₨ 8,112~~
Add to cart
Optical Sensors/Photo Transistors, Sensors
Photoelectric Sensor G183A10 NA
Optical Sensors/Photo Transistors, Sensors
Photoelectric Sensor G183A10 NA

0 out of 5
(0)

Photoelectric sensors are electronic devices capable of detecting the approximation, passage and presence of metallic materials or not, through emission and reception of infrared light provided they are located within the distance of actuation of the sensor. The detection of the photoelectric sensor occurs without physical contact between the sensor and the trigger because it has no moving parts subject to mechanical wear and thus increase the life of the equipment. The Photoelectric Sensor price base on the three operating principles Diffuse, Retroreflective, Barrier. Photoelectric sensor price model G18 with plastic housing has tubular shape with 18mm diameter (M18) with cable type or connector depending on type (diffuse, reflective or barrier) has sensing distances of 10, 30 cm, 2 and 5 m. Photoelectric sensor price has electrical configuration type NPN or PNP contacts normally open (NA), normally closed (NF) or (NA + NF) and connection with 2 or 4 pins.

SKU: n/a
₨ 1,440 ~~₨ 1,872~~
Read more
Others, Sensors
Piezo Pack of 5 Large Pickups 45mm
Others, Sensors
Piezo Pack of 5 Large Pickups 45mm

0 out of 5
(0)

Piezo Pack of 5 Large Pickups 45mm Attach the round disc to the object that will be knocked on such as a door and measure the voltage across the two wires. Piezo elements can also produce sound when a voltage is applied across them. They convert between electricity and vibration in both ways; Vibration applied at the round end can be detected as a voltage across the wire leads and inversely, the voltage applied across the wire leads causes the round end to vibrate.

SKU: n/a
₨ 430 ~~₨ 520~~
Add to cart
Others, Sensors
Piezoelectric Shock Tap Sensor Vibration Switch Module
Others, Sensors
Piezoelectric Shock Tap Sensor Vibration Switch Module

0 out of 5
(0)

Item Name: Piezoelectric Shock Tap Sensor Vibration Switch Module

Item Type: Vibration Switch Sensor Module

Working Voltage: 5.0V (DC)

Interface Type: AD/DO

AO: Analog Signal Output

DO: TTL Level Output

Working Temperature: -10 C ~ +70 C

Size: Approx. 20 x 20mm / 0.8 x 0.8in

Weight: 4.5 g / 0.2 oz(approx.)

Test Method and Wiring:

G (GND):: Power ground

V (VCC): Operating voltage 5V (DC)

ADO: Analog signal output

According to the vibration intension, the higher the output voltage, the higher the vibration amplitude sensitivity can be adjusted by the potentiometer (the left turn sensitivity is low, the right turn sensitivity is high). The high sensitivity output can be adjusted to respond with a mouth blow or a tap with a hand.

DO: TTL level output. Output signal LED indication. TTL output valid signal is high level, output control power

SKU: n/a
₨ 715 ~~₨ 935~~
Add to cart
Distance & Proximity, Sensors
PIR Sensor Detector Smart Switch 220V
Distance & Proximity, Sensors
PIR Sensor Detector Smart Switch 220V

0 out of 5
(0)

Working Voltage: AC 85-265V

Sensing angle: 180 degree

Sensing distance: Max 12m (25℃) (Adjustable)

Sensor delay: 5s – 6min (Adjustable)

LUX Setting: 2 – 2000LUX (Adjustable)

Material: ABS

IP rating: IP65

Installation Height: 1.8m – 2.5m

Lifespan: 50,000 hours

Working temperature: –10℃ ~ +40℃

Working humidity: less than 93% RH

Item size: 15.6 * 6.0 * 4.7cm / 6.1 * 2.4 * 1.9in (L * W * H)

Item weight: 118g / 4.2oz

Package size: 20 * 14 * 4.7cm / 7.9 * 5.5 * 1.9in (L * W * H)

Package weight: 128g / 4.5oz

SKU: n/a
₨ 989 ~~₨ 1,248~~
Add to cart
Distance & Proximity, Sensors
PR08-2DP Inductive Proximity Sensor
Distance & Proximity, Sensors
PR08-2DP Inductive Proximity Sensor

0 out of 5
(0)

Wire type and power

DC 3-wire type 12-24VDC Sensing side diameter

M08Sensing distance 2mm

Installation Non-shield(non-flush)

Standard sensing target8x8x1mm(iron)

Response frequency1kHzCurrent specification

Current consumption: Max. 10mA

Control output PNP Normally Open Material Brass(nickel plated)

Cable Standard/material Standard cable

Protection structureIP67

Approval Body length Standard type

Environment Ambient temperature-25 to 70C, storage: -30 to 80C

Environment Ambient humidity35 to 95% RH, storage: 35 to 95% RH

Hysteresis(distance)Max. 10% of sensing distance

Residual voltage Max. 2V

Weight Approx. 64g(approx. 52g)

SKU: n/a
₨ 769 ~~₨ 1,039~~
Add to cart
Distance & Proximity, Sensors
PR12 2DN Autonics Proximity Sensor
Distance & Proximity, Sensors
PR12 2DN Autonics Proximity Sensor

0 out of 5
(0)

Improved the noise resistance with a dedicated IC.

Built-in reverse polarity protection circuit (DC 3-wire type).

The built-in surge protection circuit.

Built-in overcurrent protection circuit (DC type).

Long life cycle and high reliability, and simple operation.

IP67 protection structure (IEC standard).

Replaceable for micro switches and limit switches.

SKU: n/a
₨ 999 ~~₨ 1,629~~
Add to cart
Distance & Proximity, Sensors
PR12 4DN Autonics Proximity Sensor
Distance & Proximity, Sensors
PR12 4DN Autonics Proximity Sensor

0 out of 5
(0)

PR12 4DN Autonics PR12-4DN Inductive Proximity Sensor – 4mm is the most common and affordable solution for no-touch object detection. The most commonly-used proximity sensor is the inductive type, which generates an electromagnetic field to sense metal objects passing close to its face. This is usually the easiest sensing technology to apply in applications where the metal object to be detected is within an inch or two of the sensor face. Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness, and type of metal being detected and will in general be between 70 to 80% of the standard distance.

SKU: n/a
₨ 769 ~~₨ 1,039~~
Add to cart

Distance & Proximity, Sensors

PR12 4DP Proximity sensor Autonics

Distance & Proximity, Sensors

PR12 4DP Proximity sensor Autonics

0 out of 5

(0)

Sensing distance	1.5mm
Installation	Shield(flush)
Standard sensing target	8×8×1mm(iron)
Response frequency	1.5kHz
Current specification	Current consumption: Max. 10mA
Control output	PNP Normally Open
Material	Brass(nickel plated)
Cable Standard/material	Standard cable
Body length	Standard type
Weight	Approx. 64g (approx. 52g)