-
×
MG90S Metal Gear Micro Servo Motor
1 × ₨ 499
Subtotal: ₨ 499
Shop
Showing 913–960 of 1337 results
-
Switches And Buttons
Mechanical Endstop Switch Module
Mechanical Endstop Switch Module V1.2 Mechanical Limit Switch CNC 3D printer Mechanical Switch used a lever switch for detection. it detects by lever when it is activated. when the CNC end stop switch is activated, it pulls the signal LOW. this mechanical limit switch also contains LED, this LED will glow up when the switch is activated. this is the best limit switch than the old-style CD ROM audio connector cable. because the mechanical end stop switch uses a standard 4-pin 100 pitch header and accepts a standard. this mechanical switch detects when any stage has reached its minimum or maximum, instead of messing with flags or complicated light beam interruption.
SKU: n/a -
Gear Motor
Metal DC Geared Motor w/Encoder – 12V 251RPM 18Kg.cm
This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 700 counts per revolution of the gearboxs output shaft.These units have a 0.61″ long, 6 mm(0.24″)-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm(0.61″) apart.This motor is an ideal option for your mobile robot project.Warning: Do not screw too far into the mounting holes as the screws can hit the gears. Manufacturer recommends screwing no further than 3mm (1/8″) into the screw hole.SKU: MOT258 -
Clearance Sale, Motors & Drivers, Servo Motor
MG90S Metal Gear Micro Servo Motor
- Weight 9 grams.
- Dimension: 22.2 x 11.8 x 31 mm approx
- Stall torque: 1.8 kgf·cm.
- Operating speed: 0.1 s/60 degree.
- Operating voltage: 4.8 V (~5V)
- Working Torque: 2kg/Cm Reaction Speed: 0.11 Seconds / 60 Degrees (4.8v)
- Operating Temperature: 0 -55 The Deadband Setting: 5 Microseconds Plug Type: Jr, Futaba General Rotation Angle: 180 Degrees
- Servo: Analog Servo Operating Voltage: 4.8v Structural Material: Copper Metal Teeth, Coreless Motor, Double Ball Bearing
SKU: n/a -
Others, Sensors
Microphone Amplifier – MAX9814 w/ Auto Gain Control
- The default ‘max gain’ is 60dB, but can be set to 40dB or 50dB by jumpering the Gain pin to VCC or ground.
- You can change the Attack/Release ratio, from the default 1:4000 to 1:2000 or 1:500.
- The ouput from the amp is about 2Vpp max on a 1.25V DC bias, so it can be easily used with any Analog/Digital converter that is up to 3.3V input. If you want to pipe it into a Line Input, just use a 1uF blocking capacitor in series.
SKU: n/a -
Mic/Voice Recognition, Sensors
Microphone Sound Sensor Module
This module allows you to detect when sound has exceeded a set point you select. Sound is detected via a microphone and fed into an LM393 op amp. The sound level set point is adjusted via an on board potentiometer. When the sound level exceeds the set point, an LED on the module is illuminated and the output is sent low. It has working voltage of 3.3-5V.
SKU: n/a -
Digital Meter, Multi Meters
Mini DC 100V 10A Digital Voltmeter Ammeter Blue Red LED Volt Amp Meter Gauge
Digital Meter, Multi MetersMini DC 100V 10A Digital Voltmeter Ammeter Blue Red LED Volt Amp Meter Gauge
- Operating voltage: DC 4.5 – 30V
- Measure voltage: DC 0 – 100V
- Minimum resolution(V): 0.1V
- Measure current :10A (measure directly, built-in shunt)
- Minimum resolution(A): 0.01A
- Operating current:
- Dimensions: 48 x 29 x 21mm
- Mounting cutout: 45.5 x 26.5mm
- Refresh rate: about 500mS / times
- Measure accuracy: 1% (± 1 digit)
- Operating temperature: -10 to 65° c
- Operating Humidity: 10 to 80% (non-condensing)
SKU: n/a -
Clearance Sale, Digital Meter, Multi Meters
Mini DC 5-120V Voltmeter LED Panel 3 Digital Display
Monitor DC voltage between 5V and 120V with this simple 2-wire voltmeter
1% toleranceWorking current: <13mA
Refresh rate: 300ms
Reverse polarity protection
Auto ranging 0.1V precision
Size: 48x29x22mmHole size: 46x27mm
Operating Temp: -20 – 65DC only, not for use with AC
Voltage above 132V will damage the unit
SKU: n/a -
-
Accessories
Mini Magnifying Glass with Illuminant
- Material: Plastic
- Color: BLUE
- Bulb: 1 LED bulb with white light and the LED has a long life
- Runtime: It can reach a max of 200 hours with only double lithium batteries(CR2016)or one(2023)
- Operate Voltage: 3V
- Operate current: 300mA
- Size: 60(L) x 30(W) mm
SKU: n/a -
Gear Motor, Motors & Drivers
Mini Metal Gear Motor (6V 60RPM)
6V 60Rpm Geared DC Motor is a mini geared motor with high torque capability despite its small size and because of that it is very suitable for small sized projects that require high torque such as sumo robots. The motor runs at 60rpm at 6V. It is suggested not to run the motor at voltages higher than 6V.
SKU: n/a -
Converters
Mini Mp1584en Dc-dc Buck Adjustable Step Down Module 4.5v-28v Input 0.8v-20v Output
- Model:MP1584
- Name:DC-DC step-down module
- Input Voltage: 4.5V ~ 28V
- Output voltage: 0.8V ~ 20V
- Output Current: 3A (Max)
- Conversion efficiency: 96% (maximum)
- Output Ripple: <30mV
- Switching frequency: 1.5MHz (highest) typically 1MHz
- Operating Temperature: -45°C ~ +85°C
- Size: 22mm * 17mm (L * W )
SKU: n/a -
-
Motor Drivers, Motors & Drivers
MONSTER MOTO SHIELD DUAL VNH2SP30 16V 30A
- Power supply: Max 16V
- Max current rating: 16A
- Practical Continuous Current: 14A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 m OHM (per leg)
- Maximum PWM frequency: 20kHz
- Thermal Shutdown
- Under-voltage and Over-voltage shutdown.
SKU: n/a -
Gear Motor, Motors & Drivers, Robotics, Wheels
Motor + Wheel DC Geared 5V
- Continuous Current(A):70mA
- Output Power:-
- Protect Feature: Waterproof
- Type: Gear Motor
- Construction: Permanent Magnet
- Certification: CE
- Torque:5500g*cm
- Speed(RPM):125RPM
- Commutation: Brush
- Voltage(V):3 – 6V
- Efficiency: plastic gear motor
SKU: n/a -
Arduino & IOT Boards, Shields
MOTOR DRIVER SHIELD L293D
This motor driver expansion board is based on the L293D chip which is designed to drive up to 4 bidirectional DC motors with individual 8-bit speed selection. It can also drive 2 stepper motors (unipolar or bipolar), single coil or double coil, interleaved or micro-stepping. It contains 4 H-bridges which provide up to 0.6 A per bridge (1.2A peak) at voltages from 4.5 V to 36 V. This shield has pull down resistors to keep the motors disabled during power up. It also features a 2-pin terminal block to ensure separate logic and motor external power supplies. This expansion board is compatible with Arduinos Mega, Diecimila, and Duemilanove. This motor driver shield is capable of driving:Four DC motors and two servos, Two DC motors, stepper motor, and two-way servo, Two stepper motors and servos.
SKU: n/a -
Converters, Mega Payday Sale
Mp2307 Mini 360 Dc To Dc Step Down Buck Converter Module
- MPS MP2307DN buck regulator IC
- 4.75 – 23VDC input voltage
- 1.0 – 17VDC selectable output voltage
- 3A surge current, 1.8A continuous rated current
- Maximum conversion efficiency of 95% (5Vin, 3.3Vout ~200mA output)
- 340kHz switching frequency
- 30mV no-load output ripple
- 0.5% load regulation
- 2.5% voltage regulation
- -40 to +85°C operational temperature range
- Built-in 160°C thermal shutdown
- Dimensions 17x11x3.8mm (0.67×0.43×0.15″)
SKU: n/a -
Remotes and Controllers
MP3 Universal Remote
- Size = 86*40*6.0 mm
- Button = PET
- Max keys = 21 keys
- Power = DC 3.0V
- Battery = 1 X CR2025/160mAH
- Remote Distance 8M
- Voltage = 2.2-3.4V
- Wattage = 30MA TYP
- Transmitted Power = 70MW/SR TYP
- Working Temperature = -10C- +50C
- Tube infrared wavelengths = 940Nm
- Infrared carrier frequency = 38KHz
- Material = 0.125mmPET
- Effective Angle = 60 Degree
- Usage = Audio/Video Players/Car audio/ MP3 /DVD music player
SKU: n/a -
Accelero, Gyro. IMU, Magneto, Sensors
MPU9250 IMU 9DOF MPU-9250
- Three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs
- Three 16-bit ADCs for digitizing the accelerometer outputs
- Three 16-bit ADCs for digitizing the magnetometer outputs
- Gyroscope full-scale range of 250, 500, 1000, and 2000/sec (dps)
- Accelerometer full-scale range of 2g, 4g, 8g, and 16g
- Magnetometer full-scale range of 4800T
- I2C and SPI serial interfaces
- Internal Digital Motion Processing engine supports advanced MotionProcessing and low power functions such as gesture recognition using programmable interrupts
- Power supply: 3-5v
SKU: n/a -
-
Gas Sensor, Sensors
MQ-5 METHANE GAS SENSOR MODULE
- Indication of the signal output.
- Dual signal output (analog output, and TTL level output)
- TTL output signal is low. (When low output signal light, and can be connected directly to the microcontroller)
- 0 ~ 5V analog output voltage, the higher the concentration, the higher the voltage.
- Liquefied petroleum gas, natural gas, city gas, better sensitivity.
- Has a long life and reliable stability
- Fast response and recovery characteristics
- Operating voltage: DC 5 V
SKU: n/a -
Gas Sensor, Sensors
MQ135 Air Quality Detector Sensor Module
- Air Quality Sensor Module
- Condition: New
- Size: 32mm X22mm X27mm
- Main chip: MQ-135
- Operating Voltage: 5V DC
- Type: Analog & Digital
- Sensitivity to Ammonia, Sulphide and Benzene steam
- Detecting Range: 100-1000ppm
- With signal output instructions
- TTL output signal is low level
- Analog 0 ~ 5 v voltage output, the higher the concentration, the higher the voltage
- Color is showing pictures.
- Sensitive for benzene, alcohol, smoke
- Fast response and recovery
- Adjustable sensitivity
- Signal output indicator
- Output voltage boosts along with the concentration of the measured gases increases
SKU: n/a -
Gas Sensor, Sensors
MQ2 Gas Sensor Detector Module
- Its dimensions are 36 x 20 x 21 (LxWxH)
- Its weight is 8gm.
- Its operating voltages are plus 5V.
- It can be used to detect LPG, Alcohol, Propane, Hydrogen, CO, and even methane.
- Its analog output voltages are 0V to 5V.
- Its digital output voltages are 0 to 5V.
- Its preheat duration is 20 seconds.
- This sensor can be used as a digital or analog sensor.
- Its sensitivity can be varied by the potentiometer.
SKU: n/a -
Gas Sensor, Sensors
MQ2 MQ-2 SMOKE SENSOR MODULE
- Operating voltage: 5V
- Analog output voltage: 0V to 5V
- Digital output voltage: 0V or 5V (TTL Logic)
- Preheat duration: 20 seconds
- Sensitivity range: 200 to 10,000 ppm
- Gases detected: LPG, Smoke, Alcohol, Propane, Hydrogen, Methane and Carbon Monoxide
- Dimensions: 3.6 x 2 x 1 cms
- Weight: 5 grams
SKU: n/a -
Gas Sensor, Sensors
MQ3 MQ-3 Gas Sensor Module
- Model No.: MQ-3
- Dimensions: 36 x 20 x 21 mm (LxWxH)
- Weight: 6gm
- Heater voltage: 50.2V (AC DC)
- Loop voltage: 24V (DC)
- Load resistance: adjustable
- Heating Resistance: 31 3 (Room temperature)
- Heating Power: 900mW
- Surface thermal resistance: 2Kohm-20Kohm (0.4mg/L alcohol)
- Sensitivity: Rs (in air)/Rs (0.4mg/L alcohol) 5
- Working temperature: 20 degrees 2 degree
- Humidity: 65% 5%RH
- Signal output light indicator.
- Analog and level signal output.
- TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module).
- The carbon monoxide detection with better sensitivity.
- Has a long service life and reliable stability.
- Rapid response recovery features.
SKU: n/a -
Gas Sensor, Sensors
MQ7 MQ-7 Gas Sensor Detection Module
- Product Name: Gas Sensor Module;
- Model: MQ-7;
- Type: Analog
- Detecting Type : Carbonic Oxide(Co);
- Rated Voltage: DC 5V;
- Rated Current: 180mA
- Detecting Range: 100-1000ppm;
- Pin Quantity: 4;
- Pin Spacing: 1.8mm/ 0.07″
- Pin Definition: AO-analog Output, DO-Digital Output, GND- Ground, VCC-Voltage To Current Converter ;
- Total Size: 35 x 20 x 21mm/ 1.4″ x 0.79″ x 0.83″ (L*W*H)
SKU: n/a -
Arduino & IOT Boards, Converters, Module
MT3608 Step-Up Adjustable DC-DC Switching Boost Converter
- Input Voltage: 2-24V DC
- Output Voltage: 5-28V DC
- Maximum Output Current: 2A
- Switching Frequency: 1.2Mhz
- Output Ripple: <100mV
- Module Size: 37.2mm x 17.2mm x 14.0mm
- About 93% Efficiency
- Features like an under-voltage lockout, thermal overload protection
SKU: n/a -
-
-
LED Lights & Bulbs
Multicolor LED Strip
Led strip lights 16.4 ft: SMD LED, 24 key IR remote 16 color 4 DIY modes, colorful mood lighting. Cuttable and Linkable: The led lights can be easily cut and linked with other strip led lights, which can be cut every 3 LEDs along with the cutting marks, you can also customize the length of the led lights. Easy Installation: Complete led light strip kit Including 1 rolls of 16.4ft led light strips, power adapter, 24keys remote Control, controller, instruction manual, led strip lights installation accessories(4 pin connectors, gapless solderless connectors, back adhesive hooks), no need for other devices, self-adhesive tape easy to install. Multiple Scenes Available: Rgb led strip rope lights is a suitable house ornament, transforms your home, kitchen, ceiling, back of tv, desk, stairs, bar, and more multiple Scenes Available: Rgb led light strip is a suitable house ornament, transforms your home, kitchen, ceiling, lcd, tv, table, stairs, room, drawing room and more with color changing lights.SKU: n/a -
Variable/Potentiometer
Multiturn Variable Potentiometer 10K
Multiturn Variable Potentiometer 10K / Variable Resistor. There are lots of trimpots out there. Some are very large, some so small they require a screwdriver. Here at ELECTRONATION, we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it’s breadboard friendly to boot! Perfect for your next LCD contrast adjuster, opamp setting, or volume level. This is 3296W model 103 within the datasheet.
SKU: n/a -
Variable/Potentiometer
Multiturn Variable Potentiometer 1K
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer.
SKU: n/a -
Variable/Potentiometer
Multiturn Variable Potentiometer 5K
A potentiometer is a manually adjustable variable resistor with 3 terminals. Two terminals are connected to both ends of a resistive element, and the third terminal connects to a sliding contact, called a wiper, moving over the resistive element. The position of the wiper determines the output voltage of the potentiometer.
SKU: n/a -
Multicopter Accesories
NAZA M Lite with GPS
DJI now brings out the most cost-effective solution, the NAZA-M Lite flight control system. As the simplified version of NAZA-M, it inherits the high reliability and stability of NAZA-M in a basic package offering a very competitive price. The innovative All-in-One design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control.
The *optional plug and play GPS module (sold separately) will greatly enhance the performance for aerial photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.
The advanced attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability. It is more flexible and stable, and gives the hobbyists a wonderful flight experience.
SKU: n/a -
-
